- Aqua Gloss III - High gloss inks for paper and
board. Very user friendly
- Pro Plus - An ultra high strength paper and
board ink. Pro Plus may be used or blended "as is" on low volume
aniloxes for process, line, and combination printing or extended for use
with higher volume aniloxes. Most Pantone® colors can be matched to
print on 800 lpi 1.8 bcm aniloxes. Pro Plus is very stable and user
friendly.
- Aqua Therm CP - ideal for direct thermal
applications with imaging through the ink.
- Aqua Stable Flex - designed for thermal
transfer applications. Other EIC Inks accept thermal transfer imaging.
Please check with your EIC technical sales representative for more
information.
- Flex II - Especially made for porous paper
surfaces with excellent lay-down and minimal mottling.
- Aqualope X - made for the demands of the
envelope converter, high strength, excellent stability, prints without
tracking and smearing. Anti-curl properties are built into the inks.
- Aqua Display - Line and process inks for all
paper board substrates including Kemi Light, mottled white and others.
Postprint and preprint formulas. Water-based and UV Coatings.
- Metallics - Several options: Aqua Gloss
Metallics for maximum rub resistance, Aqua Sparkle for a brilliant and super
stable metallic and the Eckart Ultra Star Metalure metallics for a foil-like
appearance on smooth surfaces. Many specialized products are also
available.
- Max Flo - Fluorescent inks print strong,
bright, and clean
- Coatings - All types; gloss, semi-gloss,
flat, imprintable, hot stampable, rub, scratch, chemical and
water-resistant. Please consult with an EIC technical sales
representative for a specific recommendation.
- Water-based Adhesives - For film to film and
film to paper lamination.
|
